Stone veneer installation in Eugene OR - a finish that keeps water out of the wall
Bare block or a tired wall you want in stone? We check it can carry the weight, then set stone that keeps water out.
- Licensed and fully insured.
- Free in-person estimates.
- Expect a reply within 1 business day.
What goes into stone veneer installation in Eugene?
Stone veneer installation in Eugene covers a wall of your house with manufactured stone or full-bed natural stone, which is real stone at full thickness. The stone is held on by a mortar bond, so the wall looks like stone and stays dry behind it. Most of the job is checking the wall and getting it ready before the first stone goes up.
You usually have a wall in mind, maybe a plain block foundation, a chimney face or the front of the house, and a stone you like. The price moves with how much wall there is, which stone you pick, how much prep the wall needs and whether heavy stone needs extra support. The schedule moves with the forecast, because fresh mortar can't take rain or a freeze. If you want a freestanding stone wall and not a facing, that's stone masonry. Either way, the estimate I write after seeing your wall tells you what we'll do and why.
How do you know your stone veneer needs attention?
Streaks and white powder
Dark streaks or a chalky white powder running down from the joints usually mean water is getting behind the stone and carrying salts back out. Left alone, that water keeps soaking the wall behind it, and the fix gets bigger every year.
Loose or hollow stones
A stone that rocks when you push it or sounds hollow when you tap it has lost its mortar bond, usually from water or a rushed install. It can fall, and the gap it leaves lets more water in behind the stones around it.
Damp spots inside
Stains, soft drywall or a musty smell on the inside of a wall with veneer outside often mean water is getting past the stone into the framing. The longer it goes on, the more wood can rot, and a stone fix turns into a framing repair.
How we do stone veneer installation
Most veneer trouble starts with water getting in behind the stone, so that's where I put our attention. First I check that your wall is sound and can carry the stone you want, because a wall that's moving or rotting will take the stone with it. Then we get the surface ready so the mortar holds and water has a way out. We set the stone in mortar, take extra care at windows, doors, corners and the bottom edge where water tends to get in, and clean up as we go.
Sometimes the wall isn't ready for stone yet. If a block wall is cracked or needs rebuilding, our crew handles that first as part of our work on concrete block walls. If the trouble is lower down, we do foundation block wall installation so everything above has something solid to sit on.
Get an estimate for stone veneer on your wall
Send the form and we'll get back to you within one business day to set a time. I come out, look at the wall and write you a free estimate, with no obligation to go ahead.
- info@eugeneconcreteandmasonry.com
- Based in
- Eugene, OR 97401
- Hours
- Mon–Fri: 7 AM–11 PM, Sat–Sun: 6 AM–10 PM
What happens when you call about stone veneer in Eugene?
Here's how a veneer job runs on your side, from the first call to the day we walk the finished wall with you.
Call or send us a message
Call (541) 225-4006 or use the form, and we'll set a time for me to see the wall. Tell us which wall you want covered and the stone you have in mind.
I come out and look
I look at the wall, ask what you want from it and write an estimate that says what we'll do and why. You see what's driving the cost before anything starts.
We set a date and build
Once you go ahead, we take care of anything the city needs and set a start date. If you'd like a project consultation with city staff before anything is filed, those are booked two weeks in advance, so ask early.
Clean up and walk it
When the stone is set and the joints are finished, we clean up the site. Then we walk the wall with you before we call it done.
Why Eugene homeowners call Stonecraft Eugene Concrete and Masonry for veneer
I write the estimate myself
I come out, look at your wall and write the estimate, and our own masons and laborers do the work while I check it as it goes. You deal with the person who saw the wall, not someone reading notes about it.
Running this business since 2017
I learned on commercial jobs where an inspector checked everything and shortcuts got torn out, and I started this business in 2017 to work that way on houses. Satisfaction guaranteed on every job, and I'd rather tell you a wall isn't worth covering than sell you the job.
Licensed and fully insured
The state licensing board says Oregon law generally requires anyone paid for construction work that improves property to be licensed. We're licensed and fully insured, so that risk isn't yours to carry.
Call or send us a message and I'll come look at the wall before anyone talks about stone.
Stone veneer, the walls behind it and permits in Eugene
The City of Eugene issues building permits for additions, alterations and remodels to existing houses. Its list names work like decks and garages but not stone veneer, so the list alone doesn't settle whether your job needs one. If it's unclear, we check with the city before we start, not after, and if your job needs a permit, we pull it and handle the inspections. If you have your own questions, the city's residential plan review takes them by email or at 541-682-5611.
On jobs around here we see plenty of plain block and poured concrete foundations, and framed walls under old siding, and each needs different prep before stone goes on. We're based in Eugene and meet the same mix of houses on jobs in Springfield and Cottage Grove, so we check every wall the same way before we price stone for it.
Questions about stone veneer in Eugene
Can stone veneer go on my existing wall in Eugene?
Usually, if the wall is sound. One maker accepts concrete, block, masonry, or framed walls covered with a water-resistive barrier, a wrap that keeps water off the framing, and lath, a metal mesh the mortar grabs. Industry guidance rules out unsound walls and EIFS, an insulated exterior finish. Clean block that isn't painted or sealed can take stone directly, but poured concrete needs corrosion-resistant metal lath and a scratch coat, a first layer of mortar, because the release agents used on concrete forms keep mortar from bonding.
Is natural stone too heavy to put on my house?
It can be. Full-bed natural stone weighs far more than manufactured veneer, and that difference decides whether a standard wood-framed wall can carry it. Heavier stone may need a ledge at the foundation, structural steel or added support in the wall, which adds work to the job, so I tell you on site which stone your wall can take.
How much does stone veneer installation cost in Eugene?
Stone veneer installation in Eugene usually costs about $2,600 to $10,000 per job. Where yours lands depends mostly on how much wall there is, which stone you choose and how much prep or support the wall needs. The estimate I write after seeing your wall spells out what we'll do and why.
How do I choose a stone veneer installer?
Ask how they do the work, because industry guidance says field workmanship is the usual source of veneer problems, and installing to recommended practice helps veneer perform as intended for decades. The industry's installer qualifications call for a certified manufactured stone veneer installer or documented experience on projects of similar size and scope, so ask each installer which of those they can show you.
How long does new stone veneer need to be protected from rain?
One maker's guide says to protect fresh work from rain and freezing for 48 hours, and to hold off installing below 40°F. That's why a start date has to follow the forecast, with time set aside to keep the new stone covered.
How do I clean stone veneer without damaging it?
Clean it without acid. One maker's guide says to keep acid off finished stone and to use only a breathable sealer, and only if a sealer is specified. A sealer that traps moisture can hold water right where you want it to leave.
Related masonry work that often comes first
Concrete block walls
When the wall you want to cover is cracked, leaning or missing, a new or rebuilt block wall gives the stone something solid to hang on.
See the service Concrete block wallsFoundation block wall installation
If your foundation is cracked, settling or needs replacing, a properly built block foundation wall comes first, before anything goes on the face of the house.
See the service Foundation block wall installation
Service areas for stone veneer around Eugene
Stonecraft Eugene Concrete and Masonry is based in Eugene, Oregon, and installs stone veneer across the cities around it, including Springfield and Junction City. The 8 cities below each have their own page, and if yours isn't listed, call and ask.
Eugene, OR
Have your wall checked before picking stone
Call (541) 225-4006 or send the form with what the wall is made of, how it looks now and a few photos, so I know what to look for when I come out.