Masonry Contractor in Creswell, OR - Brick, Chimneys and Retaining Walls That Hold Up
Stonecraft Eugene Concrete and Masonry is a masonry contractor working in Creswell, OR. We repair older brick and chimneys, build retaining walls, block walls and paver driveways, and lay stone for homes across the city.
- Licensed and fully insured.
- Free in-person estimates.
- Expect a reply within 1 business day.
Creswell houses, from downtown to the farm edges
Creswell sits between Eugene and Cottage Grove in the south end of the Willamette Valley. It's a small city with a compact downtown, a few shopping strips and neighborhoods that run right up against farmland, and we get the same calls here we get in Eugene: brick that needs work, chimneys people don't trust and walls holding back a yard.
Close to downtown we see older houses with brick chimneys, brick steps and garden walls that have had decades to settle. Further out the lots get bigger, with newer houses, longer drives and yards that open onto fields, so the work runs more to retaining walls, block, pavers and stone, and the ground decides how much digging and base a job needs before we lay anything.
Masonry services we do for Creswell homes
Foundation repair
Cracks in a block or brick foundation, a sticking door or a damp crawlspace are worth a look. I'll tell you what's moving and what can wait.
See the service Foundation repairChimney repair
Older Creswell houses often have brick chimneys with loose bricks at the top, a cracked cap or leaking flashing. We rebuild what's failing and leave sound brick alone.
See the service Chimney repairTuckpointing
When mortar joints on a brick house or chimney turn sandy and recessed, we grind them out and repack fresh mortar before water works into the brick.
See the service TuckpointingBrick repair
On older brick homes here, cracked or flaking bricks don't mean the whole wall comes down. We cut out the bad ones and match what's there.
See the service Brick repairDriveway pavers
Long drives on bigger Creswell lots need solid base work underneath. We dig out, pack the base and set pavers so they sit flat under a pickup.
See the service Driveway paversRetaining wall construction
On sloped yards around Creswell, a retaining wall needs drainage behind it and a solid footing under it, or it starts to lean. We build both in.
See the service Retaining wall constructionMasonry restoration
Old brick around downtown can usually be saved. We clean it, repoint the joints and swap only the bricks that are done, so it keeps its look.
See the service Masonry restorationFireplace installation
Adding a masonry fireplace to a Creswell home means a proper footing, firebox and chimney built together. I'll look at where it can go before we plan anything.
See the service Fireplace installationStone veneer installation
Stone veneer, a thin stone face over a wall, suits foundations and porch columns on newer houses here. We get the backing and water barrier right first.
See the service Stone veneer installationConcrete block walls
Block walls work for property lines, shop buildings and raised garden beds on bigger lots. We set steel and grout in the hollow cores so the wall holds together.
See the service Concrete block wallsFoundation block wall installation
For an addition, garage or shop on a Creswell lot, we lay foundation block on a sound footing, square and level, before anyone frames on top.
See the service Foundation block wall installationOutdoor kitchen masonry
Big backyards here have room for a block-and-stone outdoor kitchen. We build the base and counters to carry the grill's weight and heat.
See the service Outdoor kitchen masonryWalkway construction
A walk from the driveway to the door, or out to a shop or garden, gets laid on a packed base so it doesn't sink or puddle.
See the service Walkway constructionBrick wall installation
A brick garden or front wall suits the older houses near downtown. We match brick and mortar to the house and set it on a proper footing.
See the service Brick wall installationStone masonry
Natural stone fits lots that open onto farmland, from low walls to steps and planters. We lay it so the weight sits on stone, not just mortar.
See the service Stone masonryBrick pointing
If a few joints have cracked or dropped out on a chimney or brick step, pointing just those spots now can head off a bigger repair later.
See the service Brick pointing
Get an on-site masonry estimate in Creswell
Send the form and we'll get back to you within one business day. I'll come out to Creswell, look at the job and give you a free on-site estimate, with no obligation to go ahead.
- info@eugeneconcreteandmasonry.com
- Based in
- Eugene, OR 97401
- Hours
- Mon–Fri: 7 AM–11 PM, Sat–Sun: 6 AM–10 PM
Working in Creswell: permits, licenses and what sets the price
The City of Creswell Building Department takes permit applications for plumbing, mechanical and electrical changes to homes. Its list doesn't name masonry, so when it isn't clear whether your wall, chimney or fireplace needs a permit, I ask the city before we start, not after, and if it does, we pull it and handle the inspections. That's the part of the schedule we don't control, because the work waits until the permit's in hand. Oregon law generally requires anyone paid to work on your house to hold a state contractor license, so ask any mason you talk to for theirs. We're licensed and fully insured.
What moves the price is mostly what you can't see yet, like how much old work has to come out and how much digging the ground takes, and the estimate I write says what we'll do and why. Getting here is a straight run down I-5 from Eugene, so trucks of block, stone and pavers arrive without eating into the work day. As a masonry contractor in Eugene, OR, we work the cities around it too, from Junction City to Springfield, and the houses there are a lot like Creswell's.
Older brick and bigger lots around Creswell
Brick that's been up for decades wears at the mortar first. The joints go soft and sandy, water works in behind them, and then bricks loosen, chimney tops start to lean and steps crack. Catch it at the joint stage and it's usually a repointing job, packing fresh mortar into cleaned-out joints, instead of a chimney rebuild, and I'll tell you which one you've got.
Further out, the calls are about ground. A yard that drops away, a driveway sinking at the edges or a new shop that needs a foundation all come down to digging, base and drainage, so that's where we spend the time before any block or stone goes down.
How a masonry job in Creswell runs, start to finish
From your first call to the final walk-around, here's what happens, who does it and when it helps to have you there.
Call or send the form
You call (541) 225-4006 or send the form, and we get back to you to set a time. Tell us what you're seeing so I know what to look at.
I come out and look
I come out myself, look the work over and ask what you want from it, so it helps if you're home. You get an estimate that says what we'll do, why, and what can safely wait.
We pull permits and build
If the job needs a permit, we pull it and keep it on site for the inspector. Our own masons and laborers do the work, and I check it as it goes.
Clean up and walk it
We clean up and walk the finished job with you before we call it done. Satisfaction guaranteed on every job.
Questions about masonry work in Creswell
Do I need a permit to build a retaining wall in Creswell, OR?
You need a building permit if the wall holds up a building, because Oregon's residential code requires one statewide. For other walls, the code lets a city require a permit once a wall is over 4 feet tall, or lower when it holds back a steep slope or carries added weight like a driveway above it. If your wall needs one, we pull it.
What is the best way to fix a leaning retaining wall in Creswell?
Usually the best fix is to take the leaning section down and rebuild it with drainage behind it and a footing sized for the load. A lean almost always means water or soil is pushing harder than the wall was built for, so patching the face or bracing it rarely holds for long. A taller wall or one under a driveway may need a permit, as covered above.
How much does it cost to have masonry work done in Creswell?
Your price is set mainly by the materials, the size and height of the work, and how easy it is to reach. Matching old brick or laying natural stone runs more than standard brick, block or stone veneer, and a wall on soft ground takes more digging and base. At the estimate I'll walk you through where the money goes.
How do I check flood and landslide hazards for my address in Creswell?
Look your address up on the state's geohazards viewer, which shows mapped hazards such as 100-year flooding, earthquake soft soil and landslide. State guidance treats any place with a 1% or higher yearly chance of flooding as high risk. It's worth a look before a foundation or retaining wall job, because soft or wet ground changes how deep we dig and how we drain.
Should I repair or rebuild my old brick chimney in Creswell?
Repair it if the damage is mostly worn joints, a cracked cap or a few loose bricks at the top, and rebuild above the roofline if bricks are loose all through or the stack leans. I'd rather repoint a sound chimney than sell you a new one, and I'll show you what I'm seeing.
Will a masonry contractor from Eugene, OR come out to Creswell?
Yes. We're based in Eugene and work across the cities around it, including Creswell, Junction City, Cottage Grove and Veneta. If your city isn't named on the site, call (541) 225-4006 and ask.
Other service areas
Eugene, OR
Tell us about your Creswell masonry job
Say what you're seeing and when you need it done, and I'll come out already knowing what to look for.