Masonry Contractor in Junction City, OR - Brick, Chimney and Wall Repair That Holds Up
Stonecraft Eugene Concrete and Masonry is a masonry contractor based in Eugene, OR, working in Junction City on brick and mortar repair, chimneys, retaining walls, foundations, walkways and pavers for homes in town and out on rural lots.
- Licensed and fully insured.
- Free in-person estimates.
- Expect a reply within 1 business day.
Junction City houses, from old brick to acreage
Junction City sits north of Eugene, and the masonry calls we get there split two ways. In the older part of town, it's brick chimneys, brick and block foundations and porch steps that have been patched more than once. Out past the edges, it's acreage and farm properties, with long driveways, shops and yards big enough for a patio wall or an outdoor kitchen. We're up there on the same runs that take us to jobs in Santa Clara, so it's familiar ground.
Most lots here are flat, so a retaining wall usually holds a raised yard or a driveway edge rather than a hillside, and how water drains behind it matters more than how tall it is. On the older houses, the first job is usually matching the brick and mortar that's already there, so a repair doesn't look like one.
Masonry work we do in Junction City
Foundation repair
When an older house here shows a foundation crack or a dropped corner, we find the cause before we patch, so the repair holds.
See the service Foundation repairChimney repair
Brick chimneys on older houses in town lose mortar, and the concrete cap on top cracks with age. We fix what's failing and tell you what can wait.
See the service Chimney repairTuckpointing
If the mortar between your bricks is sandy or sitting back from the face, we grind out worn joints and refill them before water gets behind the brick.
See the service TuckpointingBrick repair
Cracked or flaking bricks in a porch, step or wall can be cut out and replaced, and we match the old brick as closely as we can.
See the service Brick repairDriveway pavers
Gravel or cracked concrete driveways on rural lots are a good fit for pavers, because a damaged section lifts out and goes back without tearing up the rest.
See the service Driveway paversRetaining wall construction
On flat lots here, retaining walls usually hold a raised yard, garden bed or driveway cut, and we build them with drainage behind so they stay straight.
See the service Retaining wall constructionMasonry restoration
For older brick that's had years of patchwork, we take it back to sound material and rebuild it so it looks like it belongs.
See the service Masonry restorationFireplace installation
If you want a brick or stone fireplace in a farmhouse or newer home, we plan the firebox and chimney together so it draws well and looks right.
See the service Fireplace installationStone veneer installation
Thin stone set over a plain foundation, porch base or entry dresses up a house, and we set it so water drains out instead of sitting behind it.
See the service Stone veneer installationConcrete block walls
Block walls make property-line walls, shop walls and planters on bigger lots, and we fill and reinforce them where the wall has to carry or hold back weight.
See the service Concrete block wallsFoundation block wall installation
For an addition, a shop or a new house on acreage, we lay the block foundation walls level and square, because everything above them depends on it.
See the service Foundation block wall installationOutdoor kitchen masonry
Big yards here have room for a grill station, counter and seating wall in brick, block or stone, built on a solid base so the counters stay level.
See the service Outdoor kitchen masonryWalkway construction
On a rural lot or an older house with a heaved path, we build brick, stone or paver walkways on a packed base so they stay flat underfoot.
See the service Walkway constructionBrick wall installation
A brick garden or entry wall can match older brick in town or suit a newer house, and we set it on a footing sized for its height.
See the service Brick wall installationStone masonry
Natural stone suits farm properties here for steps, wall caps and garden walls, and we fit each stone so the weight sits on stone, not on mortar.
See the service Stone masonryBrick pointing
When only a few joints on a chimney, step or wall have opened up, pointing fills them with matching mortar before the damage spreads into a bigger job.
See the service Brick pointing
Get an on-site estimate for masonry in Junction City
We get back to you within one business day. I come out, look at the work and write the estimate myself, free and on site, with no obligation to go ahead.
- info@eugeneconcreteandmasonry.com
- Based in
- Eugene, OR 97401
- Hours
- Mon–Fri: 7 AM–11 PM, Sat–Sun: 6 AM–10 PM
Working in Junction City: permits, licenses and price
Inside the city limits, building permits go through the Junction City Building Department, and whoever does the work, homeowner or contractor, is responsible for getting them. When we do the work, that's us. If your job needs a permit, we pull it and handle the inspections, and if it's unclear, we check with the department before we start, so on a permitted job the start date turns on the city as well as on our schedule. At this time the city doesn't require a business license for a permanent contractor, only for temporary and door-to-door sellers, so the license worth checking is the state one. The Oregon Construction Contractors Board says anyone paid to do construction work that improves a property generally has to hold a state license. We're licensed and fully insured.
What moves the price here is mostly what's behind the surface and how hard it is to reach: how much mortar or brick has to come out, whether we're matching older brick, whether a wall needs drainage and a deeper base, and how far material has to travel across a rural lot. The schedule turns on the permit if there is one, our crew's calendar, and mortar and concrete getting the time they need to set before anything goes on them. The estimate I write on site says what we'll do and why, so you can see where the money goes. We run Junction City jobs alongside our work in Veneta and the other cities around Eugene, so getting a crew up here isn't a stretch.
Why Junction City houses and lots need masonry work
The older houses in town are where most repair calls start. Mortar is meant to wear out before the brick does, but after enough decades the joints go sandy, water gets into the brick, the faces start to flake and chimney caps crack. We usually repoint before we talk about rebuilding, and we use a mortar soft enough for old brick, because mortar harder than the brick around it is what breaks old brick in the first place.
Out on the acreage and the newer lots, the calls are for things that get driven on, walked on and lived around, like driveways, paths, shop walls and outdoor kitchens. Those fail when the ground under them settles, so we dig down to firm soil, pack the base and give walls a way to drain.
How a masonry job runs when you call us in Junction City
Here's how it goes from your first call or message to the walk-through at the end, and who you'll deal with along the way.
Call or send a message
Call (541) 225-4006 or use the form and tell us what you're seeing. We set a time to meet you at the house.
I look at the job
I come out myself, look at the work, ask what you want from it and write an estimate that says what we'll do and why. You'll know the price before anything starts, and I'll tell you if part of it can wait or isn't worth doing.
We permit and build it
If the job needs a permit, we get it before we start and keep it and any approved plans on site for the inspector, as the state requires. Our own masons and laborers do the work, and I check it as it goes.
Clean up and walk through
We clean up and walk the finished work with you before we call it done, so you can point out anything that doesn't look right. Satisfaction guaranteed on every job.
Questions about masonry in Junction City
Do I need a permit for masonry repair in Junction City, OR?
Masonry repair is on the state's list of work that needs no building permit, within set limits, while new construction and structural changes to a house do need one. That exemption covers the building permit only, and the limits matter, so if your job is close to the line we check with the city before we start. You can look up permits already on file for your address through the city's Building Department page.
Do I need a permit to add a fireplace or wood stove in Junction City?
A wood stove needs a mechanical permit under the state's rules, and building a new masonry fireplace is construction work we plan to permit. If the project also runs a gas line, that's a mechanical permit too. We sort it out before the first brick goes in.
How much does masonry repair cost in Junction City?
You get a real number from the estimate I write after seeing the job, because masonry cost comes from what's behind the surface. Repointing a few joints and rebuilding a chimney top are very different jobs, and matching old brick adds time. I'll also tell you which parts can wait, so you're only paying for what needs doing now.
What causes a retaining wall to lean?
Usually water. When soil behind a wall stays wet with no way to drain, the pressure builds and pushes the wall out over time, and a shallow base or a wall built taller than it should be does the same. We look at drainage first, because rebuilding a wall without fixing that just starts the clock over.
How long does a building permit last in Junction City, Oregon?
A permit expires if work hasn't started within 180 days of issue, or if work stops for 180 days or more. Extension requests go to the local building official. We plan permitted jobs to start soon after the permit comes through.
What is the best way to tell if my brick needs tuckpointing or new brick?
Look at the mortar first. If it's sandy, crumbling or sitting back from the brick face, the joints need tuckpointing, and if the bricks themselves are cracked through or their faces are flaking off, those bricks need replacing. I'll tell you which you've got when I'm on site.
Other service areas
Eugene, OR
Call about your Junction City masonry project
Catching loose mortar or a cracked chimney cap early usually keeps a repair from turning into a rebuild.